ROOFING REPAIR – How To Replace Pipe Flashing

.embed-container { position: relative; padding-bottom: 56.25%; height: auto; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

– Step-by-step guide on how to replace old roofing vent pipe flashing boot.

1) Remove nails holding down shingles above the pipe – go up 3 rows.
2) Remove Pipe flashing.
3) Apply sealant to the bottom of new flashing (flange).
4) Slide new boot over the pipe, all the way down, and place firmly over the roof surface.
5) Apply shingles back, over the boot flange, starting first course no more than 6 inches up, from the bottom edge of the flange.
6) Seal between flange and shingles overlapping it.
7) Install shingles all the way up. Nail properly, and seal old holes in the roof and shingles.

See how to replace missing or damaged shingels, for proper shingles removal and re-installation instructions:

The post ROOFING REPAIR – How To Replace Pipe Flashing appeared first on Builders, Designers & Contractors.

from Roof Repairs & Roofing Contractors Long Island NY
via BDC Roof Long Island NY


Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s